Navis CT 26

From defect photos to verified CCF upload.

A practical workflow assistant for QAQC teams, site coordinators and contractors managing Unit, CCF and rectification records.

Request a Pilot View Workflow
Controlled pilot introduction · scope agreed with each team
Interface concept · replace with an approved product screenshot
Project overviewRectification review
MM
Units in review12
Pending evidence08
Ready to review24
Unit / CCFStatus
Unit A · CCF 04Review
Unit B · CCF 11Pending
Unit C · CCF 07Ready
Unit D · CCF 02Missing
Visual check
Confirm evidence before uploadItem reference and image remain visible together.
Built for the people managing the evidence
QAQC teamsDefect coordinatorsSite engineersProject coordinatorsDocument controllersMain contractorsInterior fit-out contractorsProperty handover teams

Core problems

Less time reconstructing the photo trail.

Navis CT 26 is shaped around repetitive coordination work that often sits between incoming site photos and a verified defect record.

Request a product demonstration
01Large volumes of rectification photos
02Inconsistent image naming
03Manual matching against defect items
04Missing evidence
05Duplicate processing
06Wrong photo-to-item matching
07Slow reporting
08Repetitive upload work

Core capabilities

Designed around practical defect and CCF coordination.

The product supports the work of organising, checking and preparing records. It does not remove the need for project judgement.

01

Unit, CCF and Item tracking

Keep each rectification record connected to the project references used during review.

02

Photo import and organisation

Bring prepared rectification photos into a structured workflow for checking.

03

Pending and missing item detection

Compare the available evidence with required items and expose gaps for follow-up.

04

Existing resolved-item checking

Support checks against items that are already resolved before more work is processed.

05

Visual verification

Review the photo and its Unit, CCF and Item together before saving or preparing an upload.

06

Today upload summary

See what has been prepared during the current working day.

07

Weekly upload summary

Build a practical view of uploads and outstanding evidence across the week.

08

Status by unit

Review activity, pending items and missing evidence at unit level.

09

Important item image previews

Keep priority evidence visible where an additional visual check is needed.

10

Client-system upload preparation

Designed to support upload workflows for client defect-management systems.

Product workflow

Every automated step leads to a visible review.

The proposed workflow keeps human verification in the sequence before records are saved or prepared for a client system.

  1. 01Import organised photos
  2. 02Read Unit and CCF references
  3. 03Compare with required items
  4. 04Surface pending or missing evidence
  5. 05Verify every image visually
  6. 06Prepare client-system upload
  7. 07Summarise progress

Product views

Screenshot areas ready for approved product images.

These containers are deliberately labelled placeholders. They should be replaced with current, non-confidential screenshots before a public launch.

Product screenshot placeholder
Unit list dashboard
Unit list dashboardOverview of units, CCF records and current review status.
Product screenshot placeholder
CCF detail view
CCF detail viewItem-level references and the evidence currently connected to them.
Product screenshot placeholder
Pending and missing item screen
Pending and missing item screenA focused view of gaps that still need rectification evidence.
Product screenshot placeholder
Photo review screen
Photo review screenThe mandatory checkpoint where the image and its references are verified together.
Product screenshot placeholder
Upload summary
Upload summaryA daily view of records prepared for the next client-system workflow stage.
Product screenshot placeholder
Weekly report
Weekly reportA practical summary of progress, pending items and missing evidence.

Founding pilot

A controlled path from workflow review to rollout proposal.

  1. 01Workflow review
  2. 02Controlled data setup
  3. 03Pilot configuration
  4. 04Team demonstration
  5. 05Real project testing
  6. 06Results review
  7. 07Rollout proposal
Apply for a Pilot Pilot pricing available after scope review.

Frequently asked questions

Clear answers for pilot-stage teams.

Navis CT 26 is being introduced carefully. Product scope and deployment are agreed around the controlled project setup.

Is Navis CT 26 already publicly available?

Navis CT 26 is currently being introduced through controlled pilot projects.

Is it cloud-based?

Deployment will depend on the approved project setup. The product is being developed with practical local and controlled workflows in mind.

Does it replace the client’s defect-management system?

No. Navis CT 26 is designed to support the preparation, verification and tracking workflow before or alongside the client’s existing system.

Can it process photos already organised by Unit and CCF?

Yes. It is designed to work with organised rectification-photo workflows. Navis PhotoFlow is a planned future companion product and is not required for the Navis CT 26 pilot.

Can it automatically upload everything?

The workflow includes a mandatory visual review step before saving or upload because matching references do not always guarantee that the image belongs to the correct defect item.

Who can apply for a pilot?

Main contractors, QAQC teams, fit-out contractors, property handover teams and construction organisations managing multiple defect items or CCF records.

Review your workflow

Start with one controlled project scope.

Tell Navisgo how your team currently receives, checks and prepares rectification photos.

Request a Pilot Request a Demo